Most accounts that have a GA4–Google Ads link in place assume the integration is working. Often it's not — not fully. The property link is just the foundation. On top of it sit auto-tagging, conversion imports, and audience sharing, each of which can fail independently and silently. A broken conversion import doesn't generate an error; it just stops sending data to Google Ads while your campaigns keep running on stale signals.

This checklist covers all four components, what to check in each, and the most common ways each one breaks.

The GA4–Google Ads link establishes a data-sharing relationship, but it has four layers, and each layer has independent failure modes:

All four need to be configured correctly. Here's how to check each one.

Step 1: Verify the Property Link

01
GA4 Admin
Confirm the GA4 property is linked to the correct Google Ads account

In GA4, go to Admin → Product Links → Google Ads Links. You should see the linked Google Ads account(s) listed here with a green active status.

What to verify:

  • The linked account matches the active Google Ads account (Customer ID matches)
  • Link status is Active, not Pending or Broken
  • If multiple accounts are linked, each one is still in use — orphaned links to old accounts or test accounts are common
  • Personalization is enabled on the link (required for audience sharing)
A Pending link means the Google Ads account hasn't accepted it yet. GA4 data is not shared with Google Ads until both sides confirm the link. This is a common reason why conversion imports appear set up but show no data.

You can also verify from the Google Ads side: Tools → Linked Accounts → Google Analytics should show the same GA4 property with a Connected status.

Step 2: Check Auto-Tagging

02
Google Ads Settings
Confirm auto-tagging is on and gclid parameters are not being stripped

Auto-tagging appends a gclid parameter to every click from a Google Ads ad. GA4 reads this parameter on landing and attributes the session to the correct campaign, ad group, and keyword. Without auto-tagging, GA4 can't distinguish Google Ads traffic from organic search.

Enable auto-tagging in Google Ads

  1. In Google Ads, click Account Settings (gear icon)
  2. Under Auto-tagging, confirm "Tag the URL that people click through from my ad" is checked
  3. Save if needed

Verify gclid is surviving to the landing page

Auto-tagging being on is not enough — the gclid parameter needs to survive through redirects and land on the page GA4 is measuring. Common ways it gets stripped:

  • A redirect between the ad destination URL and the final landing page that doesn't pass query parameters
  • A URL rewriting rule on the server or CDN that strips unknown parameters
  • A landing page builder or A/B testing tool that redirects to a clean URL

To verify: click a live Google Ads ad and check the final URL in the browser address bar. You should see ?gclid= followed by a long string. If the URL is clean, the parameter was stripped somewhere in the redirect chain.

Manual UTM parameters don't replace auto-tagging. UTMs tell GA4 the campaign name — auto-tagging tells Google Ads which click led to a conversion. You need both. If you're using manual UTMs without auto-tagging, your GA4 attribution data is present but your Google Ads conversion reporting is missing the click-level linkage it needs for Smart Bidding.

Step 3: Audit Conversion Imports

03
Google Ads Conversions
Verify GA4 conversion events are imported and receiving data

Once the property link is active, you can import GA4 conversion events into Google Ads so campaigns can bid against them. Importing is not automatic — each conversion event must be explicitly added.

Check what's imported

  1. In Google Ads, go to Goals → Conversions → Summary
  2. Look for conversion actions with a source of "Google Analytics 4"
  3. Check the status column — it should show "Recording conversions", not "No recent conversions" or "Inactive"

What to look for

  • No imported conversions at all — the link is active but nobody set up the import. Go to Goals → Conversions → New Conversion Action → Import → Google Analytics 4.
  • Imported but showing "No recent conversions" — the GA4 event may have been renamed, removed, or may no longer be firing. Check GA4's Events report to confirm the event is still active.
  • Duplicate conversion actions — both a Google Ads native conversion tag and a GA4 import for the same action. This counts each conversion twice and inflates reported conversions.
  • All conversions marked as Primary — not all conversions should be Primary (used for bidding). Micro-conversions like scroll depth or time on page being used for Smart Bidding can mislead campaign optimization.
Removing a conversion action in Google Ads does not remove the GA4 event. If you remove a duplicate conversion import, verify which one campaigns were bidding against before deleting, or you'll drop all conversion signals mid-flight.

Step 4: Review Audience Sharing

04
GA4 Audiences
Confirm GA4 audiences are publishing to Google Ads and sized correctly

GA4 audiences built from behavioral segments — users who viewed a product, completed a checkout step, or visited a specific page — can be shared with Google Ads for remarketing and exclusions. This requires personalization to be enabled on the property link.

Check audience publishing

In GA4, go to Admin → Audiences. For any audience you want in Google Ads, the "Destinations" column should list your linked Google Ads account. If it's blank, the audience is only available in GA4 — not in Google Ads.

To add a Google Ads destination to an existing audience: open the audience, click Edit, and add the Google Ads account as a destination.

Check audience size in Google Ads

In Google Ads, go to Tools → Audience Manager. GA4 audiences appear here once they meet the minimum size threshold (typically 100 users for Display, 1,000 for Search). Audiences below the threshold will show as "Under review" or will have a size of 0, meaning they can't be used for targeting yet.

  • If an audience has been publishing for more than 7 days and is still at 0, check whether the GA4 event or condition that defines it is actually firing
  • If you have audiences you no longer use in campaigns, archive them — unused published audiences still consume the GA4 audience limit (currently 100 active audiences per property)

Common Failure Patterns

These are the issues that appear most often in GA4–Google Ads integration audits:

How to Verify the Full Integration

After checking all four components, run a quick data sanity check:

  1. In GA4, go to Reports → Acquisition → Traffic Acquisition and filter for google / cpc. If you're running active Google Ads campaigns and see zero sessions here, auto-tagging is broken.
  2. In Google Ads, check conversion volume for the last 30 days on your imported GA4 actions. Compare it to the same conversion event in GA4's Conversions report for the same period. They won't match exactly (different attribution models and counting methods), but they should be in the same ballpark — large discrepancies point to a configuration problem.
  3. Use GA4's DebugView to fire a test conversion on your site and confirm the event appears in GA4 within a few minutes.

GA4 Health Check audits your Google Ads integration as part of the configuration review — checking the link status, conversion import health, and whether auto-tagging is configured correctly. Run a 60-second audit to get a full integration status report.

Travis Gunn
Founder of GA4 Health Check. Working with Google Analytics since 2013, with over 250 clients audited across almost every industry vertical. 100% Job Success on Upwork for over a decade.